TheCRP-SEP®is a single stage horizontal separator designed to efficiently remove non-soluble oils, solids and entrained air from oily water at flow rates through 440 gallons per minute. The design of the CRP-SEP¨ eliminates the need for chemical flocculants and or additives. Each model is engineered to provide the proper combination of retention time and surface area for the flow rate and performance can be adjusted by controlling the flow. Multiple
internal chambers are fitted with permanent oleophillic "honeycomb" matrix,
providing a large amount of surface area per square foot for the oil
droplets to make contact with and coalesce and float upwards to the oil
collection area provided within unit.
The CRP-SEP® system can be configured to be gravity fed or have the oily
water pumped into the separator by system feed pumps. The oily water flow is
directed through our unique corrugated matrix packs where the oil makes
contact with the matrix and coalesces, as the droplet grow they flow along
the incline of the matrix and rise to the top of the vessel. Once sufficient
oil has collected at the top of the unit, the oil probe assembly sends a
signal that initiates the oil discharge cycle, fresh water is pumped into
the separator pushing the oil out the discharge header. Once the oil is
evacuated the unit, the probes sense the lack of oil and signal the system
to return to the normal operation of oil separation.
- Integral low shear positive displacement oil discharge pump
- Single heavy duty horizontal process vessel.
- Permanent corrosion resistant corrugated matrix.
- Oil sensing probe assembly.
- Oil Content Monitor assembly.
- Oily water inlet and discharge check valves.
- Factory pre-set system pressure relief valves.
- Clean water inlet, treated water outlet, and recirculation solenoid control valves.
- Process Sample valves.
- System drain valve assembly.
- Electrical wiring, starter and control panels.
- All necessary piping, gauges, switches required for operation.
CRP-SEP®
CRP-SEP®