• Email to receive printed materials
• Application data sheet (specific to product)

The RECYCLO-SEP® is a fully automatic wastewater recycler that processes dirty water created by cleaning equipment into water that is clean enough to be reused. The process flow rates are 6 GPM for the RECYCLO-SEP®Model 2000 and 12 GPM for the RECYCLO-SEP® Model 2800.

The RECYCLO-SEP® has been proven very effective in removing oils, grit, and grime from water used in conjunction with pressure washers, steam cleaners, or similar equipment. The system maintains a proper pH balance so that the recycled water may be safely reused. The RECYCLO-SEP® separator eliminates any wastewater problems while reducing the waste to a semi-dry cake making it more manageable for storage or disposal.

The principal system components consist of four vertically skid mounted tanks equipped with a feed pump, process pump, cartridge filter, three metering pumps, and associated valves and controls. The four processing tanks include the first stage tank, the flocculate tank, in which the majority of oil and solids are removed from the wastewater influent. The second stage, the separator tank, in which the separation of residual oil and solids remaining in the wastewater occurs. The third stage, the surge tank, provides a supply of clarified water for operation of the process pump. The fourth stage, storage tank, which stores the clean processed water to be recycled to the pressure washer or steam cleaner.

• Level activated feed pump with float(s) to pump untreated water from customer's sump through the separator tank.
• Flocculant metering pump and injection manifold.
• Chlorine metering pump and injection manifold.
• pH Adjustment metering pump and injection manifold.
• Inline mixer assembly.
• Primary flocculation and aeration above ground tank.
• ORP/pH monitoring and control system.
• Primary Separator Tank with skimmer and CWWS cone assembly.
• Aerated surge tank with secondary adjustable oil skimmer.
• Processed water cartridge filter assembly and backwash valve.
• Treated water storage and make up valve assembly.
• Sludge sock manifold.
• Electrical wiring, starter and control panels.
• All necessary piping, valves and accessories required for process.